titanium dioxide anatase opacity to meet the objectives and to minimize cost, requires precise control of the addition rate of titanium dioxide. Mills are moving online monitoring using feedback control loop development. Titanium dioxide is Plastic impact modifier controlled by the flow line opacity. Ingredients for a very fast response time to changes in the lower opacity fluctuations, thus reducing the amount of the pigment used per ton of paper. Problems which need to be Calcium stearate considered online product opacity and opacity variations. You can usually correct this bias, or adjust the target line. Other mills there is a non-normal operation of the test strip of opaque elements, and the corresponding adjustment of the flow of paint, this technique is very effective.
titanium dioxide anatase accurate calibration of flow measurement equipment is critical. There have been reports that a paper mill, on a machine using an excessive amount of titanium dioxide in the entire system does not stearic acid bring any other changes. But the survey found a flowmeter failure. Therefore, we must fully consider the use of time flowmeter and ensure the accuracy of the validation. Currently in commonly used in the paper industry is a magnetic flow meter and density / mass flowmeter.
Another key aspect is the addition rate of the flow control valve, the size must be selected to suit the required flow rate. The valve should operate within the range of nearly 50%. If the valve is opened too big or too small, will affect the control accuracy. Control valve seat require regular maintenance, because they will wear. When the control valve is closed if the flow is still present, it shows the seat definitely worn out.
organic pigments,antimony flame retardant,titanium dioxide anatase 